Square Meters to Square Feet Converter
Convert square meters (m²) to square feet (ft²), or square feet to square meters, with square yards, acres and hectares, for homes, rooms and land.
Results
| Item | Value |
|---|
Quick Answer
Multiply square meters by 10.7639 to get square feet: 10 m² is 107.64 ft², 50 m² is 538.2 ft² and 100 m² is 1,076.4 ft². To turn square feet into square meters, multiply by 0.092903: a 1,000 ft² apartment is 92.90 m² and a 2,000 ft² house is 185.8 m².
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Square Meters to Square Feet Converter
- Quick Answer
- Related Calculators
- How This Square Meters to Square Feet Converter Works
- How to Use the Square Meters to Square Feet Converter
- Square Meters to Square Feet Formulas
- Key Terms
- Worked Example
- Real-Life Examples
- Square Meter vs Square Foot
- Square Meters to Square Feet Chart
- Why the Area Factor Is Not 3.28
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Square Meters to Square Feet Converter Works
Apartment listings, floor plans, flooring, paint coverage and land are measured in square meters in most of the world and in square feet in the US. Choose the direction, enter the area and press Calculate. The converter gives square feet to three decimal places (or square meters to four), plus square yards, acres and hectares.
Quick explanation: 1 m² ≈ 10.76 ft².
- m² to ft²: multiply by 10.7639.
- ft² to m²: multiply by 0.092903 (or divide by 10.7639).
- Mental math: multiply m² by 10 and add 7.6%.
How to Use the Square Meters to Square Feet Converter
- Choose square meters to square feet or square feet to square meters.
- Enter the area.
- Press Calculate.
- Read the converted area, plus square yards, acres and hectares.
Square Meters to Square Feet Formulas
- Definition: 1 ft² = 0.3048 m × 0.3048 m = 0.09290304 m² exactly
- Square feet from m²: ft² = m² ÷ 0.09290304 = m² × 10.76391
- Square meters from ft²: m² = ft² × 0.09290304
- Square yards: 1 yd² = 9 ft² = 0.83612736 m²
- Land: 1 acre = 43,560 ft² = 4,046.86 m²; 1 hectare = 10,000 m²
Key Terms
- Square meter (m²): the SI unit of area, a 1 m by 1 m square.
- Square foot (ft²): a 1 ft by 1 ft square, 0.0929 m².
- Square yard (yd²): 9 square feet.
- Acre: 43,560 square feet.
- Hectare (ha): 10,000 square meters.
Worked Example
A European apartment is listed at 85 m². How big is it in square feet?
- 85 ÷ 0.09290304 = 914.9 ft²
- In square yards: 85 ÷ 0.836127 = 101.7 yd²
- So it is about the size of a 900 ft² US apartment.
Going the other way, a 12 × 15 ft bedroom is 180 ft², or 180 × 0.092903 = 16.72 m².
Real-Life Examples
- Apartments: 60 m² is 646 ft².
- Houses: 2,500 ft² is 232 m².
- Flooring: a 20 m² floor needs 215 ft² of planks plus waste.
- Land: 1,000 m² is 0.247 acres.
Square Meter vs Square Foot
- Square meter (m²): 10.7639 ft².
- Square foot (ft²): 0.0929 m², about a floor tile 1 ft by 1 ft.
- Square yard (yd²): 9 ft², used for carpet.
Square Meters to Square Feet Chart
1 ft² = 0.09290304 m² exactly.
| Square meters | Square feet | Square yards |
|---|---|---|
| 1 m² | 10.76 ft² | 1.20 yd² |
| 5 m² | 53.82 ft² | 5.98 yd² |
| 10 m² | 107.64 ft² | 11.96 yd² |
| 20 m² | 215.28 ft² | 23.92 yd² |
| 25 m² | 269.10 ft² | 29.90 yd² |
| 30 m² | 322.92 ft² | 35.88 yd² |
| 50 m² | 538.20 ft² | 59.80 yd² |
| 75 m² | 807.29 ft² | 89.70 yd² |
| 100 m² | 1,076.39 ft² | 119.60 yd² |
| 150 m² | 1,614.59 ft² | 179.40 yd² |
| 200 m² | 2,152.78 ft² | 239.20 yd² |
| 500 m² | 5,381.96 ft² | 598.00 yd² |
| 1,000 m² | 10,763.91 ft² | 1,195.99 yd² |
| 10,000 m² | 107,639.10 ft² | 11,959.90 yd² |
Why the Area Factor Is Not 3.28
A meter is 3.28084 feet, but a square meter is a square that is 3.28 feet on each side, so it holds 3.28084 × 3.28084 = 10.7639 square feet. Using 3.28 for areas is one of the most common conversion mistakes, and it makes a room look less than a third of its real size. The same rule applies to volumes: a cubic meter is 3.28084³ = 35.3 cubic feet.
Floor areas can also be measured in different ways. Some listings give the gross area including walls, balconies or shared space, and others give net living area, so two homes with the same square meter figure may feel different in size. When you buy flooring, tiles or paint, measure each room yourself and add 5 to 10% for waste, then convert the total.
To find the area of a room in the first place, multiply its length by its width in the same unit. A room 4 m by 3.5 m is 14 m², which this converter turns into 150.7 ft². An L-shaped room can be split into two rectangles, worked out separately and added together before converting. Measuring in one unit and converting the final area is more accurate than converting each wall length and rounding along the way.
Common Mistakes to Avoid
- Using 3.28 for areas. Use 10.764.
- Converting each side separately but adding. Multiply the converted sides.
- Mixing gross and net area. Check what a listing includes.
- Forgetting waste for flooring. Add 5-10%.
- Confusing m² with m. Area needs square units.
Frequently Asked Questions
1 m² is 10.7639 ft².
Multiply square meters by 10.7639.
100 m² is 1,076.39 ft².
1,000 ft² is 92.90 m².
50 m² is 538.20 ft².
That is the length factor; area uses 3.28084 squared, 10.7639.
2,000 ft² is 185.81 m².
20 m² is 215.28 ft².
An acre is 4,046.86 m².
References & Sources
| Source | Used For | Link |
|---|---|---|
| NIST, Guide to the SI, Appendix B.8 | Square foot = 0.09290304 m²; square yard = 0.8361274 m²; acre = 4,046.873 m². | https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8 |
| NIST Handbook 44, Appendix C: General Tables of Units of Measurement | Units of area: square foot, square yard, acre. | https://www.nist.gov/pml/owm/nist-handbook-44-current-edition |