Skip to main content

DigitalCalculators.net

Morse Code Translator

Last updated By the DigitalCalculators.net team Free, no sign-up

Translate text to Morse code or Morse code back to text, and play it as sound. Uses the International Morse code set by the ITU.

Results

Translation
ItemValue
Letters, digits and punctuation follow ITU-R Recommendation M.1677-1. In Morse output, letters are separated by a space and words by a slash (/). When reading Morse, use dots (.) and dashes (-), a space between letters and a slash or 3 spaces between words. Characters with no Morse code are shown as #.

Quick Answer

Type text and press Translate to see it in Morse code: SOS is ... --- .... Letters are separated by spaces and words by a slash. To decode, choose Morse code to text and paste dots and dashes. Press Play sound to hear it.

Last updated: 15 November 2026 ·How we calculate this: how Morse code is timed

How This Morse Code Translator Works

Morse code writes each letter, digit and punctuation mark as a pattern of short signals (dots) and long signals (dashes). This translator uses the International Morse code in ITU-R Recommendation M.1677-1. It translates as you type and can play the code as a tone.

Features:

  • Both directions: text to Morse and Morse to text.
  • Letters, digits and punctuation: including . , : ? ' - / ( ) " = + @ and É.
  • Sound: play the code at fast, medium or slow speed.
  • Timing: the length of your message in dot units and seconds.

How to Use the Morse Code Translator

  1. Choose Text to Morse code or Morse code to text.
  2. Type or paste your text or code.
  3. Read the translation, which updates as you type.
  4. Choose a speed and press Play sound to hear it.
  5. Press Copy to copy the result.

How Morse Code Is Timed

  • Dot: 1 unit.
  • Dash: 3 units, equal to three dots.
  • Gap inside a letter: 1 unit between the dots and dashes.
  • Gap between letters: 3 units.
  • Gap between words: 7 units.
  • Sound length: total units × dot length.

These are the spacing rules in section 2 of ITU-R M.1677-1.

Key Terms

  • Dot (dit): the short signal, 1 unit long.
  • Dash (dah): the long signal, 3 units long.
  • Unit: the length of one dot, the basic time measure.
  • ITU: the International Telecommunication Union, which sets the international code.

Worked Example

Translate SOS.

  • S = ... and O = ---, so SOS = ... --- ...
  • Each S: 3 dots + 2 gaps = 5 units. O: 3 dashes (9 units) + 2 gaps = 11 units.
  • Total: 5 + 3 + 11 + 3 + 5 = 27 units (including the 2 letter gaps)
  • At 80 ms per dot: 27 × 0.08 = 2.2 seconds

Real-Life Examples

  • Distress signal: SOS is ... --- ..., 27 dot units long.
  • Names: ANNA is .- -. -. .-.
  • Practice timing: at a 120 ms dot, a 100-unit message lasts 12 seconds.
  • Decoding puzzles: .... .. becomes HI.

Morse Code vs Binary

  • Morse code: made for people to send by hand and hear, with shorter codes for common letters.
  • Binary: made for computers, with every byte the same length of 8 bits.
  • Both use two symbols: dot and dash in Morse, 0 and 1 in binary.

See the Binary Translator to turn text into 0s and 1s.

Morse Code Alphabet

From ITU-R M.1677-1, Annex 1.

LetterCodeLetterCode
A.-N-.
B-...O---
C-.-.P.--.
D-..Q--.-
E.R.-.
F..-.S...
G--.T-
H....U..-
I..V...-
J.---W.--
K-.-X-..-
L.-..Y-.--
M--Z--..
1.----6-....
2..---7--...
3...--8---..
4....-9----.
5.....0-----

Tips for Learning Morse Code

  • Learn by sound: listen to the rhythm of each letter rather than counting dots.
  • Start with common letters: E (.) and T (-) are the shortest codes.
  • Practice short words: such as SOS, CQ and your name.
  • Use the slow speed: then speed up as letters become familiar.
  • Mind the spaces: when decoding, letters need a space and words need a slash.

Common Mistakes to Avoid

  • No spaces between letters. ...---... cannot be split reliably; write ... --- ...
  • Forgetting word breaks. Use a slash (/) between words.
  • Using unsupported symbols. Characters such as ! and & have no ITU code and show as #.
  • Counting instead of listening. Learn the rhythm of each letter.
  • Mixing up similar letters. U (..-) and V (...-) differ by one dot.

Frequently Asked Questions

... --- ... (three dots, three dashes, three dots).

Choose Text to Morse code and type your text. The code appears as you type.

Choose Morse code to text and paste dots and dashes with a space between letters and a slash between words.

Yes. Press Play sound. Choose fast, medium or slow speed.

International Morse code from ITU-R Recommendation M.1677-1.

They have no code in the international standard, such as ! and &.

No. Translation and sound happen in your browser.

Three times as long as a dot.

Seven dot units.

Yes. Amateur radio operators still send and receive it, and many people learn it as a hobby or for puzzles and escape games.

No. Morse code has one code per letter, so A and a are both sent as dot dash. Decoded text is shown in capitals.

Use a full stop for each dot and a hyphen for each dash, a space between letters, and a slash between words.

References & Sources

SourceUsed ForLink
ITU-R Recommendation M.1677-1 (10/2009), International Morse code Letter, digit and punctuation codes, and spacing rules. https://www.itu.int/rec/R-REC-M.1677-1-200910-I/en
MDN Web Docs, Web Audio API Playing the code as sound. https://developer.mozilla.org/en-US/docs/Web/API/Web_Audio_API
Cite or share this calculator

DigitalCalculators.net. (2026, November 15). Morse Code Translator. https://digitalcalculators.net/morse-code-translator/