Quick Answer
Press Start / Stop mic and allow access when your browser asks. Speak, and watch the level bar: if it moves, your microphone works. The table shows the device name and the loudest level heard. Press Record 5 seconds and play back to hear how you sound. Nothing is uploaded.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Mic Test
- Quick Answer
- Related Calculators
- How This Microphone Test Works
- How to Use the Mic Test
- How the Level Is Measured
- Key Terms
- Worked Example
- Real-Life Examples
- dBFS vs dB SPL
- dBFS and Amplitude
- If Your Microphone Does Not Work
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Microphone Test Works
Your browser asks for permission before any page can use your microphone. Once you allow it, this tool reads the sound coming in and shows its level as a moving bar. If the bar moves when you speak, the microphone is working and the browser can hear it.
What it checks:
- Access: whether your browser allows microphone use on this site.
- Device: the name of the microphone in use, with a list to switch between microphones.
- Level: a live bar and the loudest level heard, in dBFS.
- Playback: a 5-second recording you can listen to, kept only on this page.
How to Use the Mic Test
- Press Start / Stop mic.
- Allow microphone access when your browser asks.
- Speak and watch the level bar move.
- Choose another microphone from the list if needed.
- Press Record 5 seconds and play back to hear yourself.
How the Level Is Measured
- Samples: the browser gives the sound as numbers from −1 to 1.
- RMS level: the square root of the average of the squared samples over about 2,048 samples.
- dBFS: 20 × log10(RMS). 0 dBFS is the loudest possible input; −20 dBFS is one tenth of that amplitude.
- Bar: shows −60 dBFS (empty) to 0 dBFS (full).
- Sound detected: shown once the level rises above −50 dBFS.
Key Terms
- dBFS: decibels relative to full scale, the level of a digital audio signal.
- RMS: root mean square, a way to measure average signal strength.
- Permission: your browser’s permission for a site to use the microphone.
- Noise suppression: a browser feature that reduces steady background noise.
Worked Example
You speak at a normal level and the loudest level reads −18 dBFS.
- RMS amplitude: 10−18 ÷ 20 = about 0.126, or 12.6% of full scale
- The bar fills to (−18 + 60) ÷ 60 = 70%
- If a quiet room reads −55 dBFS, your voice is 37 dB above the background
Real-Life Examples
- Before a video call: check the bar moves and the device name is your headset.
- New headset: compare its loudest level, such as −15 dBFS, with your laptop microphone at −28 dBFS.
- Background noise: a quiet room at −55 dBFS against speech at −20 dBFS gives a 35 dB gap.
- Recording check: listen back to hear echo, hiss or a muffled sound.
dBFS vs dB SPL
- dBFS: the level of the digital signal compared with the most the input can take. It is always 0 or below.
- dB SPL: the loudness of sound in the air, such as a quiet room or a busy street.
- Why they differ: the same sound gives different dBFS readings on different microphones and gain settings, so this tool cannot measure dB SPL.
dBFS and Amplitude
Amplitude = 10^(dBFS ÷ 20).
| dBFS | Share of full scale |
|---|---|
| 0 | 100% |
| −6 | 50.1% |
| −12 | 25.1% |
| −20 | 10% |
| −40 | 1% |
| −60 | 0.1% |
If Your Microphone Does Not Work
- Blocked access: click the lock or settings icon in the address bar and allow the microphone.
- Wrong device: pick another microphone from the list after allowing access.
- Muted: check any mute switch on your headset or laptop, and your system sound settings.
- In use: another app may be using the microphone. Close video call apps and try again.
- Operating system privacy settings: Windows and macOS can block browsers from using the microphone.
Common Mistakes to Avoid
- Clicking Block by mistake. Change the permission in your browser settings, then reload the page.
- Testing the wrong microphone. Check the device name in the results.
- A hardware mute switch. Many headsets have one on the cable or ear cup.
- Another app holding the microphone. Close call and recording apps.
- Reading dBFS as room loudness. It shows signal level, not sound level in the room.
Frequently Asked Questions
Press Start / Stop mic, allow access, and speak. If the level bar moves, the microphone works.
No. Sound is analysed in your browser. The optional 5-second recording stays in this page only.
Your browser or system denied microphone access. Allow it in the address bar or site settings and press Start again.
After allowing access, pick it from the Microphone list.
Decibels relative to full scale. 0 dBFS is the loudest the input can record, so normal readings are below 0.
Check mute switches, the selected device, system privacy settings and whether another app is using the microphone.
Yes. Press Record 5 seconds and play back, then use the audio player.
Yes, in most modern phone browsers. Allow microphone access when asked.
No. It shows the digital signal level, which depends on your microphone, so it cannot give decibels of sound in the room.
References & Sources
| Source | Used For | Link |
|---|---|---|
| MDN Web Docs, MediaDevices.getUserMedia() | Asking for and using the microphone. | https://developer.mozilla.org/en-US/docs/Web/API/MediaDevices/getUserMedia |
| MDN Web Docs, AnalyserNode | Reading the sound level. | https://developer.mozilla.org/en-US/docs/Web/API/AnalyserNode |
| MDN Web Docs, MediaRecorder | The 5-second recording. | https://developer.mozilla.org/en-US/docs/Web/API/MediaRecorder |
DigitalCalculators.net. (2026, November 15). Mic Test. https://digitalcalculators.net/mic-test/