Quick Answer
Multiply mph by 0.44704 to get meters per second: 60 mph is 26.822 m/s, 30 mph is 13.411 m/s and 10 mph is 4.4704 m/s. Divide m/s by 0.44704 to get mph: 10 m/s is 22.37 mph.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Mph to m/s Converter
- Quick Answer
- Related Calculators
- How This Mph to m/s Converter Works
- How to Use the Mph to m/s Converter
- Mph to m/s Formulas
- Key Terms
- Worked Example
- Real-Life Examples
- Mph vs m/s
- Mph to m/s Chart
- Where Each Unit Is Used
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Mph to m/s Converter Works
Physics problems, wind speeds in weather data and sports science use meters per second, while US speed limits, car speedometers and baseball pitches use miles per hour. Choose the direction, enter the speed and press Calculate. You get m/s (or mph) plus km/h, feet per second and knots.
Quick explanation: 1 mph = 0.44704 m/s.
- mph to m/s: multiply by 0.44704.
- m/s to mph: divide by 0.44704 (or multiply by 2.2369).
- Quick check: m/s is a bit less than half of mph.
How to Use the Mph to m/s Converter
- Choose mph to m/s or m/s to mph.
- Enter the speed.
- Press Calculate.
- Read m/s or mph, plus km/h, ft/s and knots.
- Use m/s in physics formulas.
Mph to m/s Formulas
- Definition: 1 mi = 1,609.344 m and 1 h = 3,600 s, so 1 mph = 1,609.344 ÷ 3,600 = 0.44704 m/s exactly (NIST)
- m/s from mph: m/s = mph × 0.44704
- mph from m/s: mph = m/s ÷ 0.44704
- km/h: km/h = mph × 1.609344 = m/s × 3.6
- ft/s: ft/s = mph × 5,280 ÷ 3,600 ≈ mph × 1.4667
Key Terms
- Miles per hour (mph): miles traveled in one hour.
- Meters per second (m/s): the SI unit of speed.
- Kilometers per hour (km/h): m/s × 3.6.
- Knot (kn): one nautical mile per hour, about 0.5144 m/s.
- Feet per second (ft/s): mph × 1.4667.
Worked Example
A physics problem asks for the kinetic energy of a 1,500 kg car moving at 45 mph. The formula needs speed in m/s.
- Speed: 45 × 0.44704 = 20.1168 m/s
- Kinetic energy: ½ × 1,500 × 20.1168² = 303,514 J
- That is about 304 kJ
Using 45 directly instead of converting would give an answer about 5.0 times too big, because speed is squared.
The reverse case comes up with weather data. A station reports a gust of 18 m/s. Divide by 0.44704 to get 40.3 mph, or multiply by 3.6 to get 64.8 km/h. Whichever unit your local forecast uses, converting the raw m/s value lets you compare it directly with the numbers you are used to seeing on the news or on a road sign.
Real-Life Examples
- Highway: 70 mph is 31.29 m/s.
- Sprinting: 10 m/s is 22.37 mph.
- Wind: 25 mph is 11.18 m/s.
- Cycling: 15 mph is 6.71 m/s, or 24.1 km/h.
Mph vs m/s
- Miles per hour (mph): 0.44704 m/s, used on US roads.
- Meters per second (m/s): the SI unit, 2.2369 mph.
- Kilometers per hour (km/h): m/s × 3.6, used on most roads outside the US.
Mph to m/s Chart
1 mph = 0.44704 m/s = 1.609 km/h.
| mph | m/s | km/h |
|---|---|---|
| 1 mph | 0.447 m/s | 1.61 km/h |
| 3 mph | 1.341 m/s | 4.83 km/h |
| 5 mph | 2.235 m/s | 8.05 km/h |
| 10 mph | 4.470 m/s | 16.09 km/h |
| 15 mph | 6.706 m/s | 24.14 km/h |
| 20 mph | 8.941 m/s | 32.19 km/h |
| 25 mph | 11.176 m/s | 40.23 km/h |
| 30 mph | 13.411 m/s | 48.28 km/h |
| 40 mph | 17.882 m/s | 64.37 km/h |
| 50 mph | 22.352 m/s | 80.47 km/h |
| 60 mph | 26.822 m/s | 96.56 km/h |
| 65 mph | 29.058 m/s | 104.61 km/h |
| 70 mph | 31.293 m/s | 112.65 km/h |
| 80 mph | 35.763 m/s | 128.75 km/h |
| 100 mph | 44.704 m/s | 160.93 km/h |
Where Each Unit Is Used
Meters per second is the SI unit of speed, so it is the one physics formulas expect: kinetic energy, momentum, drag and braking distance all assume m/s when mass is in kilograms and distance in meters. Converting first avoids answers that are off by a factor of 2.237, or 5 when the speed is squared.
Miles per hour is used for US road speeds and many US sports measurements. Kilometers per hour, which is m/s × 3.6, is used on roads in most other countries. Knots, one nautical mile per hour, are used for boats, aircraft and often for wind at sea; NIST lists a knot as about 0.5144 m/s, so 1 mph is about 0.869 knots.
Feet per second is common in US engineering and ballistics. Because 1 mph is 5,280 ft in 3,600 s, it equals 1.4667 ft/s, so 60 mph is exactly 88 ft/s, a handy figure for estimating how far a car travels in a second.
Common Mistakes to Avoid
- Skipping the conversion in physics. Formulas expect m/s.
- Multiplying by 1.609. That gives km/h, not m/s.
- Dividing by 3.6 from mph. That works only from km/h.
- Confusing knots and mph. 1 knot is about 1.151 mph.
- Rounding before squaring. Keep decimals in energy problems.
Frequently Asked Questions
Multiply mph by 0.44704.
60 mph is 26.822 m/s.
1 m/s is 2.2369 mph.
30 mph is 13.411 m/s.
10 m/s is 22.37 mph.
Yes. It comes from the exact mile (1,609.344 m) and hour (3,600 s).
Multiply m/s by 3.6.
60 mph is exactly 88 ft/s.
100 mph is 44.704 m/s.
References & Sources
| Source | Used For | Link |
|---|---|---|
| NIST Guide to the SI, Appendix B.8 | Mile per hour = 0.44704 m/s and knot = 0.5144444 m/s. | https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8 |
| NIST, U.S. Survey Foot: Revised Unit Conversion Factors | Mile = 5,280 ft = 1,609.344 m. | https://www.nist.gov/pml/us-surveyfoot/revised-unit-conversion-factors |