Quick Answer
Waist-to-height ratio = waist ÷ height, in the same units. A 34-inch waist and a 68-inch (5 ft 8 in) height give 34 ÷ 68 = 0.50, which is exactly 0.5, the start of the increased band. NICE advises keeping your waist to less than half your height, so the target for a 68-inch adult is a waist under 34 inches. 0.4 to 0.49 is healthy, 0.5 to 0.59 increased and 0.6 or more high.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Waist to Height Ratio Calculator
- Quick Answer
- Related Calculators
- How This Waist to Height Ratio Calculator Works
- How to Use the Waist to Height Ratio Calculator
- Waist to Height Ratio Formula
- Key Terms
- Worked Example
- Real-Life Examples
- Waist to Height Ratio vs BMI
- Waist Sizes by Height
- How to Measure Your Waist Correctly
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Waist to Height Ratio Calculator Works
Body mass index (BMI) compares weight with height, but it cannot tell where fat is stored. Fat around the abdomen, known as central adiposity, is linked more closely to type 2 diabetes, high blood pressure and heart disease than fat elsewhere. The waist-to-height ratio (WHtR) measures it with nothing more than a tape measure: divide your waist by your height. Because the ratio has no units, it works the same in inches or centimeters, as long as both measurements use the same unit.
In 2022 the UK’s National Institute for Health and Care Excellence (NICE) added the waist-to-height ratio to its obesity guideline, now NG246. It recommends that adults with a BMI under 35 measure it, and it gives three bands that apply to both sexes and all ethnicities, including adults with high muscle mass.
Quick explanation: keep your waist to less than half your height.
- 0.4 to 0.49: healthy central adiposity.
- 0.5 to 0.59: increased central adiposity, increased health risks.
- 0.6 or more: high central adiposity, further increased health risks.
How to Use the Waist to Height Ratio Calculator
- Choose inches or centimeters.
- Measure your waist midway between your lowest rib and your hip bone.
- Enter your waist and your height in the same units.
- Press Calculate.
- Read your ratio, your band and the waist size for a ratio under 0.5.
Waist to Height Ratio Formula
- Ratio: WHtR = waist circumference ÷ height
- Target waist: under height × 0.5
- Same units: both in inches or both in centimeters; for feet and inches, convert height to inches first (5 ft 8 in = 68 in)
For a 165 cm adult with a 90 cm waist: 90 ÷ 165 = 0.545, rounded to 0.55, which is in the increased band. Half of 165 cm is 82.5 cm, so a waist under 82.5 cm would bring the ratio below 0.5.
Key Terms
- Waist-to-height ratio (WHtR): waist circumference divided by height.
- Central adiposity: fat stored around the abdomen.
- NICE: the UK National Institute for Health and Care Excellence.
- BMI: body mass index, weight in kg divided by height in meters squared.
- Waist circumference: the measurement around the waist, midway between ribs and hips.
Worked Example
Jordan is 5 ft 6 in (66 inches) tall and measures a 42-inch waist.
- Ratio: 42 ÷ 66 = 0.636, rounded to 0.64
- Category: High (0.6 or more)
- Waist for a ratio under 0.5: under 66 ÷ 2 = 33 inches
- Reduction to reach 0.5: 42 − 33 = 9 inches
A goal of 9 inches can feel large. A first step to 39.5 inches (66 × 0.6 = 39.6) moves Jordan from the high band to the increased band, and every inch lost around the waist lowers the ratio by about 0.015 at this height.
Real-Life Examples
- Quick check: 32-inch waist at 5 ft 10 in (70 in) gives 0.46, healthy.
- Metric: 95 cm waist at 170 cm gives 0.56, increased.
- Muscular adults: a 90 kg lifter with a high BMI but an 80 cm waist at 180 cm has a ratio of 0.44.
- Tracking progress: going from 40 to 37 inches at 68 inches tall moves the ratio from 0.59 to 0.54.
Waist to Height Ratio vs BMI
- BMI: weight ÷ height². Simple, but it cannot tell fat from muscle or where fat sits.
- Waist-to-height ratio: waist ÷ height. Measures fat around the middle, the type most linked to heart and metabolic disease.
- Best together: NICE uses BMI to classify weight and the waist-to-height ratio to assess central adiposity.
Waist Sizes by Height
Waist under half your height keeps the ratio below 0.5.
| Height | Healthy below (0.5) | High from (0.6) |
|---|---|---|
| 5 ft 0 in (60 in) | 30.0 in | 36.0 in |
| 5 ft 2 in (62 in) | 31.0 in | 37.2 in |
| 5 ft 4 in (64 in) | 32.0 in | 38.4 in |
| 5 ft 6 in (66 in) | 33.0 in | 39.6 in |
| 5 ft 8 in (68 in) | 34.0 in | 40.8 in |
| 5 ft 10 in (70 in) | 35.0 in | 42.0 in |
| 6 ft 0 in (72 in) | 36.0 in | 43.2 in |
| 6 ft 2 in (74 in) | 37.0 in | 44.4 in |
| 6 ft 4 in (76 in) | 38.0 in | 45.6 in |
How to Measure Your Waist Correctly
NICE describes the method in its guideline. Find the bottom of your ribs and the top of your hip bones. Wrap a tape measure around your waist midway between these two points, which is usually just above the belly button. Stand up straight, breathe out naturally and take the reading without pulling the tape tight. Measure your height without shoes, and use the same units for both numbers.
Small changes in where the tape sits can move the ratio by 0.02 or more, so measure the same way each time and take two readings. Measuring right after a large meal or over thick clothing also inflates the result.
The bands are designed for adults with a BMI under 35. At a BMI of 35 or more, central adiposity is assumed to be high and the ratio adds little. The bands are not meant for pregnancy, and children are assessed differently, so this calculator is for adults only. A ratio is a screening measure: it points to risk, but blood pressure, blood sugar and cholesterol checks are what show your actual health.
Common Mistakes to Avoid
- Mixing units. Use inches for both or centimeters for both.
- Measuring at the belt line. Measure midway between the ribs and the hip bones.
- Pulling the tape tight or holding your breath. Breathe out normally and keep the tape snug, not tight.
- Using feet as the height number. Convert 5 ft 8 in to 68 inches.
- Using it with a BMI of 35 or more. NICE’s bands are for adults with a BMI under 35.
Frequently Asked Questions
NICE classes 0.4 to 0.49 as healthy central adiposity. Keep your waist to less than half your height.
Divide your waist measurement by your height, both in the same units.
0.5 is the start of the increased band, linked to increased health risks such as type 2 diabetes and heart disease.
0.6 or more is high central adiposity, with further increased health risks.
Yes. NICE says the same bands apply to both sexes and all ethnicities.
It measures something different. BMI does not show where fat sits; the ratio does. NICE uses both.
Midway between the bottom of your ribs and the top of your hips, just above the belly button, after breathing out.
Yes. NICE says the bands can be used for adults with high muscle mass, which is where BMI often misleads.
No. This calculator uses the adult bands from NICE NG246.
References & Sources
| Source | Used For | Link |
|---|---|---|
| NICE guideline NG246, Overweight and obesity management: identifying and assessing central adiposity | Recommendations 1.9.14 and 1.9.15 (2022): waist-to-height bands, who they apply to and Box 1 on measuring. | https://www.nice.org.uk/guidance/ng246/chapter/Identifying-and-assessing-overweight-obesity-and-central-adiposity |