Quick Answer
Press Full screen and your whole display turns pure white (#FFFFFF). Click, tap or press Esc to exit. Turn up the brightness to use it as a light for video calls or reading, or choose another color such as warm white, red, green or blue from the list.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- White Screen
- Quick Answer
- Related Calculators
- How This White Screen Works
- How to Use the White Screen
- How the White Screen Works
- Key Terms
- Worked Example
- Real-Life Examples
- White Screen vs Black Screen
- Screen Colors
- Tips for Using a White Screen
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This White Screen Works
This page fills your screen with a single solid color, white by default. Press Full screen and the white area covers the whole display, hiding the browser and the mouse pointer. Click, tap or press Esc to return to the page.
Popular uses:
- Soft light: brighten your face on video calls or light a dark room.
- Cleaning: dust, smudges and fingerprints show clearly on white.
- Pixel checks: dark or dead pixels stand out against white.
- Tracing: place thin paper over a tablet to trace a drawing.
How to Use the White Screen
- Choose White, or another color.
- Turn up your screen brightness if you want more light.
- Press Full screen, or click the white preview.
- Use the screen as a light, or check it for dust and pixels.
- Click, tap or press Esc to exit full screen.
How the White Screen Works
- Pure white: #FFFFFF, which is red 255, green 255 and blue 255, every sub-pixel at full level.
- Full screen: the browser's Fullscreen API makes the colored area cover the whole display.
- Brightness: controlled by your device; the page cannot change it.
- Other colors: red, green and blue light only one type of sub-pixel, which helps when checking for stuck pixels.
Key Terms
- Dead pixel: a pixel that stays black.
- Stuck pixel: a pixel that stays one bright color.
- Full screen: a mode where one element fills the whole display.
Worked Example
You want to check a new monitor for dead pixels.
- Clean the screen, then press Full screen on white.
- Look for black or colored dots; a dead pixel stays black on white.
- Switch to black: a stuck pixel shows as a bright dot.
- Try red, green and blue to see which sub-pixel is stuck.
Real-Life Examples
- Video calls: a laptop screen at full white lights your face evenly.
- Cleaning: spot streaks before and after wiping a monitor.
- Drawing: trace an outline through paper on a tablet.
- Photos: use a tablet as a small white backdrop for product shots.
White Screen vs Black Screen
- White screen: shows dust, smudges and dead (dark) pixels; gives light.
- Black screen: shows stuck (bright) pixels and backlight bleed; makes the screen look off.
- Use both: for a full pixel check.
Switch to the Black Screen for the other half of a pixel test.
Screen Colors
| Color | HEX | RGB |
|---|---|---|
| White | #FFFFFF | 255, 255, 255 |
| Warm white | #FFF4E5 | 255, 244, 229 |
| Black | #000000 | 0, 0, 0 |
| Red | #FF0000 | 255, 0, 0 |
| Green | #00FF00 | 0, 255, 0 |
| Blue | #0000FF | 0, 0, 255 |
| Gray | #808080 | 128, 128, 128 |
Tips for Using a White Screen
- Lighting: warm white is gentler on the eyes than pure white.
- Battery: a bright white screen uses more power on most phones.
- Keep it on: set your device not to sleep while using it as a light.
- Eye comfort: avoid staring at a full-brightness white screen in the dark.
Common Mistakes to Avoid
- Low brightness. Turn brightness up for a useful light.
- Screen going to sleep. Change the sleep setting while you use it.
- Checking pixels on a dirty screen. Clean it first so dust is not mistaken for pixels.
- Looking too long at full brightness. Take breaks to rest your eyes.
- Not exiting full screen. Press Esc or tap the screen.
Frequently Asked Questions
Press Full screen. The whole display turns white until you click, tap or press Esc.
Yes. Turn your brightness up; it works well as a soft light for video calls.
Look at full-screen white for black dots, then at black for bright dots.
Yes. Pick warm white, black, red, green, blue, gray or a custom color.
Press Esc, or click or tap the screen.
Yes, in most mobile browsers. Some phones show their own exit button.
No. Showing white is normal use for any screen.
Night mode, blue light filters or color settings change how white looks. Turn them off for pure white.
#FFFFFF, or RGB 255, 255, 255.
Yes. Put a tablet or a second monitor in front of you at full brightness, a little above eye level, and use warm white if pure white looks too harsh on your skin.
Warm white has less blue light, so many people find it more comfortable, especially in the evening or in a dim room.
Show black, red, green and blue in turn and look for one dot that keeps the same bright color on every background. That dot is a stuck pixel.
Not by itself. Phones still follow their screen timeout setting, so lengthen the timeout while you use the white screen.
References & Sources
| Source | Used For | Link |
|---|---|---|
| MDN Web Docs, Fullscreen API | Showing the color full screen. | https://developer.mozilla.org/en-US/docs/Web/API/Fullscreen_API |
| W3C, CSS Color Module Level 4 | The white color value and its RGB code. | https://www.w3.org/TR/css-color-4/ |
DigitalCalculators.net. (2026, November 15). White Screen. https://digitalcalculators.net/white-screen/