Quick Answer
Divide pascals by 6,894.757 to get psi: 100,000 Pa (1 bar) is 14.504 psi and 101,325 Pa (1 atm) is 14.696 psi. Multiply psi by 6,894.757 to get pascals: a 35 psi tire is 241,316 Pa, or about 241 kPa.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Pascals to PSI Converter
- Quick Answer
- Related Calculators
- How This Pascals to PSI Converter Works
- How to Use the Pascals to PSI Converter
- Pascals to PSI Formulas
- Key Terms
- Worked Example
- Real-Life Examples
- Pascal vs PSI
- Pascals to PSI Chart
- Gauge vs Absolute Pressure, and Which Unit to Use
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Pascals to PSI Converter Works
The pascal is the SI unit of pressure, one newton of force on one square meter. It is the unit in science textbooks, engineering drawings, weather data (as hectopascals) and most equipment specs from outside the US. Pounds per square inch is the US customary unit on tire gauges, air compressors, pressure washers, plumbing and hydraulics. Because a pascal is tiny, real pressures in pascals run into thousands or millions, which is why kilopascals (kPa) and megapascals (MPa) are common. Choose the direction, enter the pressure and press Calculate. You get psi (or pascals) plus kPa, bar, standard atmospheres and MPa.
Quick explanation: 1 psi = 6,894.757 Pa ≈ 6.895 kPa.
- Pa to psi: divide by 6,894.757.
- psi to Pa: multiply by 6,894.757.
- kPa to psi: divide kPa by 6.894757.
How to Use the Pascals to PSI Converter
- Choose pascals to psi or psi to pascals.
- Enter the pressure.
- Press Calculate.
- Read psi or pascals, plus kPa, bar, atm and MPa.
- Keep gauge and absolute readings separate.
Pascals to PSI Formulas
- Definition: 1 Pa = 1 N/m²; 1 psi = 1 lbf/in²
- NIST factor: 1 psi = 6,894.757 Pa
- psi from pascals: psi = Pa ÷ 6,894.757 (or Pa × 0.000145038)
- Pascals from psi: Pa = psi × 6,894.757
- Related units: 1 kPa = 1,000 Pa; 1 bar = 100,000 Pa; 1 atm = 101,325 Pa; 1 MPa = 1,000,000 Pa
The factor comes from the definitions: one pound-force is 4.448222 N and one square inch is 0.00064516 m², so 4.448222 ÷ 0.00064516 = 6,894.757 Pa.
Key Terms
- Pascal (Pa): one newton per square meter, the SI unit of pressure.
- PSI: pound-force per square inch, the US customary unit.
- Kilopascal (kPa): 1,000 pascals.
- Bar: 100,000 pascals, close to one atmosphere.
- psig and psia: gauge pressure and absolute pressure in psi.
Worked Example
A pressure sensor data sheet gives a working range of 0 to 700 kPa, and you want to know whether it can read the 90 psi line on your air compressor.
- 700 kPa = 700,000 Pa
- 700,000 ÷ 6,894.757 = 101.5 psi
- 90 psi × 6,894.757 = 620,528 Pa, or about 621 kPa
So the sensor tops out at about 102 psi and covers 90 psi with room to spare. In the other direction, a European bike pump that reads 600 kPa is pumping to 87 psi, a typical road bike tire pressure.
Real-Life Examples
- Tires: 240 kPa on a European car placard is 34.8 psi.
- Weather: 1013.25 hPa (101,325 Pa) is 14.70 psi.
- Concrete: 25 MPa is about 3,626 psi.
- Water pressure: 60 psi at the tap is 414 kPa.
Pascal vs PSI
- Pascal (Pa): SI unit, 1 newton per square meter; very small.
- Kilopascal (kPa): 1,000 Pa; about 0.145 psi.
- PSI: 1 pound-force per square inch; 6,894.757 Pa or about 6.9 kPa.
Pascals to PSI Chart
1 psi = 6,894.757 Pa.
| Pascals | Kilopascals | PSI | Bar |
|---|---|---|---|
| 100 Pa | 0.1 kPa | 0.0145 psi | 0.001 bar |
| 1,000 Pa | 1 kPa | 0.1450 psi | 0.01 bar |
| 6,894.757 Pa | 6.89476 kPa | 1.0000 psi | 0.0689476 bar |
| 10,000 Pa | 10 kPa | 1.4504 psi | 0.1 bar |
| 50,000 Pa | 50 kPa | 7.2519 psi | 0.5 bar |
| 100,000 Pa | 100 kPa | 14.5038 psi | 1 bar |
| 101,325 Pa | 101.325 kPa | 14.6959 psi | 1.01325 bar (1 atm) |
| 200,000 Pa | 200 kPa | 29.0075 psi | 2 bar |
| 250,000 Pa | 250 kPa | 36.2594 psi | 2.5 bar |
| 500,000 Pa | 500 kPa | 72.5189 psi | 5 bar |
| 1,000,000 Pa | 1000 kPa | 145.0377 psi | 10 bar |
Gauge vs Absolute Pressure, and Which Unit to Use
Most everyday pressures are gauge pressures: they read zero at normal air pressure. A tire gauge that shows 35 psi means 35 psi above the air around it. Absolute pressure adds the atmosphere back in, about 14.7 psi or 101,325 Pa at sea level. US gauges sometimes label the two as psig and psia. This converter changes units only. If you start with a gauge reading in kPa, the psi answer is also a gauge reading; to switch to absolute, add one atmosphere in the same unit.
Weather maps use hectopascals (hPa), where 1 hPa = 100 Pa = 1 millibar. Standard sea-level pressure is 1013.25 hPa, which is 14.696 psi. Engineers working with steel and concrete strength use megapascals, where 1 MPa is about 145 psi, so a 30 MPa concrete mix is roughly a 4,351 psi mix.
Pascals give very long numbers for everyday pressures, so for most practical uses kPa (tires, pumps) or MPa (materials) are easier to read and to compare with psi.
Common Mistakes to Avoid
- Mixing Pa and kPa. 100 kPa is 100,000 Pa, not 100 Pa.
- Multiplying instead of dividing. Pa to psi is ÷ 6,894.757.
- Mixing gauge and absolute. They differ by about 14.7 psi.
- Confusing hPa and kPa. 1 hPa is 100 Pa; 1 kPa is 1,000 Pa.
- Rounding too early. Keep 6.895 kPa per psi for good accuracy.
Frequently Asked Questions
1 psi equals 6,894.757 pascals.
Divide the pascals by 6,894.757.
100,000 Pa (1 bar) is 14.504 psi.
Divide kPa by 6.894757, or multiply by about 0.145.
1 standard atmosphere (101,325 Pa) is 14.696 psi.
1 MPa is 145.04 psi.
Either. Plain psi on tire and compressor gauges is usually gauge pressure (psig).
35 psi is 241,316 Pa, about 241 kPa.
1 hPa (100 Pa) is 0.01450 psi.
References & Sources
| Source | Used For | Link |
|---|---|---|
| NIST, Guide to the SI, Appendix B.8 | psi = 6.894757 kPa; bar = 100 kPa; standard atmosphere = 101.325 kPa. | https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8 |
| NIST, Metric (SI) Prefixes | kilo, mega and hecto used for kPa, MPa and hPa. | https://www.nist.gov/pml/owm/metric-si-prefixes |