Quick Answer
MAP = diastolic + (systolic − diastolic) ÷ 3. For a reading of 120/80 mmHg, the pulse pressure is 40 and MAP = 80 + 40 ÷ 3 = 93.3 mmHg. StatPearls notes that the body needs a MAP of at least 60 mmHg to perfuse the vital organs; a reading of 90/50 gives 63.3 mmHg.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Mean Arterial Pressure Calculator
- Quick Answer
- Related Calculators
- How This Mean Arterial Pressure Calculator Works
- How to Use the Mean Arterial Pressure Calculator
- Mean Arterial Pressure Formula
- Key Terms
- Worked Example
- Real-Life Examples
- Mean Arterial Pressure vs Pulse Pressure
- MAP for Common Readings
- What MAP Tells You, and Its Limits
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Mean Arterial Pressure Calculator Works
A blood pressure reading has two numbers. The systolic (top) number is the peak pressure while the heart contracts, and the diastolic (bottom) number is the lowest pressure while it relaxes and refills. Mean arterial pressure (MAP) is the average pressure in the arteries across one whole heartbeat. It is the pressure that actually pushes blood into the organs, which is why intensive care teams watch it closely.
The heart spends about two thirds of each beat in diastole and one third in systole at a normal resting heart rate, so the average sits closer to the diastolic number than to the systolic one. That is where the one-third rule comes from. Enter the two numbers from a blood pressure cuff and the calculator gives MAP, the pulse pressure and the working.
Quick explanation: MAP = diastolic + one third of the pulse pressure.
- Pulse pressure: systolic − diastolic.
- MAP: diastolic + pulse pressure ÷ 3.
- Minimum for organ perfusion: about 60 mmHg, per StatPearls.
How to Use the Mean Arterial Pressure Calculator
- Take a blood pressure reading.
- Enter the systolic (top) number.
- Enter the diastolic (bottom) number.
- Press Calculate.
- Read MAP, pulse pressure and the 60 mmHg check.
Mean Arterial Pressure Formula
- MAP: MAP = DBP + ⅓ × (SBP − DBP)
- Same formula, other form: MAP = (SBP + 2 × DBP) ÷ 3
- Pulse pressure: PP = SBP − DBP, so MAP = DBP + PP ÷ 3
The two forms give the same answer. For 120/80: (120 + 160) ÷ 3 = 93.3 mmHg, and 80 + 40 ÷ 3 = 93.3 mmHg. Physiologically, MAP equals cardiac output times systemic vascular resistance, plus central venous pressure, but those values need hospital equipment, so the cuff formula is the everyday estimate.
Key Terms
- Systolic pressure (SBP): the top number, peak pressure during a heartbeat.
- Diastolic pressure (DBP): the bottom number, lowest pressure between beats.
- Pulse pressure: systolic minus diastolic pressure.
- Perfusion: blood flow delivered to organs and tissues.
- mmHg: millimeters of mercury, the unit of blood pressure.
Worked Example
Three readings show how MAP changes:
- 120/80 mmHg: pulse pressure 40, MAP = 80 + 13.3 = 93.3 mmHg.
- 90/50 mmHg: pulse pressure 40, MAP = 50 + 13.3 = 63.3 mmHg, just above the 60 mmHg minimum.
- 150/95 mmHg: pulse pressure 55, MAP = 95 + 18.3 = 113.3 mmHg.
The first and second readings have the same pulse pressure but very different MAPs, because MAP depends mainly on the diastolic number. A drop in diastolic pressure therefore lowers MAP more than a similar drop in systolic pressure.
Real-Life Examples
- Nursing study: 110/70 gives a MAP of 83.3 mmHg.
- Home readings: 135/85 gives 101.7 mmHg.
- Low reading: 85/45 gives 58.3 mmHg, just below 60.
- Wide pulse pressure: 160/70 gives 100.0 mmHg with a pulse pressure of 90.
Mean Arterial Pressure vs Pulse Pressure
- Mean arterial pressure: the average pressure over one heartbeat, the pressure that perfuses organs.
- Pulse pressure: the gap between systolic and diastolic pressure, which reflects how stiff the arteries are and how much blood each beat pushes out.
- Both from one reading: the same two cuff numbers give both values.
MAP for Common Readings
MAP = diastolic + pulse pressure ÷ 3.
| Reading (mmHg) | Pulse pressure | MAP (mmHg) |
|---|---|---|
| 90/60 | 30 | 70.0 |
| 100/65 | 35 | 76.7 |
| 110/70 | 40 | 83.3 |
| 120/80 | 40 | 93.3 |
| 130/85 | 45 | 100.0 |
| 140/90 | 50 | 106.7 |
| 150/95 | 55 | 113.3 |
| 160/100 | 60 | 120.0 |
| 180/110 | 70 | 133.3 |
What MAP Tells You, and Its Limits
Doctors use MAP because organ blood flow depends on the average pressure, not on the peak. StatPearls notes that a MAP of at least 60 mmHg is needed to perfuse the vital organs, and that the body has reflexes (in the heart, blood vessels and kidneys) that work to keep it there. In sepsis, bleeding or shock, a falling MAP is an early warning sign, and treatment is often guided by a MAP target set by the care team.
MAP is also useful when a reading is unusual. A high MAP can reflect raised diastolic pressure, and a very low MAP can point to hypotension even when the systolic number looks acceptable. It is not a replacement for the blood pressure categories used to diagnose hypertension, which are based on the systolic and diastolic numbers themselves.
The one-third formula assumes a normal resting heart rate. At fast heart rates, diastole gets shorter and the true average moves closer to the middle of the two numbers, so the formula underestimates MAP a little. Intensive care monitors that use an arterial line measure MAP directly from the pressure wave and do not need the formula.
Common Mistakes to Avoid
- Averaging the two numbers. (120 + 80) ÷ 2 = 100 overstates MAP; use the one-third rule.
- Swapping the numbers. Systolic is the higher, top number.
- Using one reading. Blood pressure varies; take two or three readings.
- Treating MAP as a diagnosis. High blood pressure is diagnosed from systolic and diastolic values.
- Ignoring symptoms. Dizziness or fainting with a low reading needs medical attention.
Frequently Asked Questions
MAP = diastolic + (systolic − diastolic) ÷ 3, or (systolic + 2 × diastolic) ÷ 3.
About 93 mmHg (93.3).
StatPearls notes that a MAP of at least 60 mmHg is needed to perfuse the vital organs.
The heart spends about two thirds of each beat in diastole, so the average sits closer to the diastolic number.
Systolic minus diastolic, 40 mmHg for a reading of 120/80.
It is the time-weighted average over a heartbeat, not the simple average of the two numbers.
Some home and most hospital monitors do; otherwise use the formula.
The one-third formula assumes a normal resting heart rate; at fast heart rates it slightly underestimates MAP.
No. Hypertension is diagnosed from the systolic and diastolic numbers.
References & Sources
| Source | Used For | Link |
|---|---|---|
| DeMers D, Wachs D. Physiology, Mean Arterial Pressure. StatPearls (updated April 10, 2023) | MAP formula and the 60 mmHg minimum for organ perfusion. | https://www.ncbi.nlm.nih.gov/books/NBK538226/ |