Skip to main content

DigitalCalculators.net

Refresh Rate Test

Last updated By the DigitalCalculators.net team Free, no sign-up

Find out your screen’s refresh rate in Hz. The test counts how fast your browser draws new frames, shows the result against common rates like 60, 120 and 144 Hz, and flags choppy frames.

Results

ItemValue
The test times how often your browser paints a new frame, which normally matches your screen’s refresh rate. Browsers can lower it on battery saver, in a background tab or when the page is busy, and some screens run below their maximum rate in your system settings. Keep this tab in front and the computer plugged in for the best reading. Nothing is saved or sent.

Quick Answer

Press Start test and keep the tab in front while the yellow block moves. When it finishes, your estimated refresh rate appears in Hz, with the closest standard rate and a count of choppy frames. For the best reading, plug in your laptop and close other busy tabs.

Last updated: 19 November 2026 ·How we calculate this: how the refresh rate is measured

How This Refresh Rate Test Works

A screen's refresh rate is how many times per second it draws a new picture, measured in hertz (Hz). A 60 Hz screen draws 60 pictures every second, and a 144 Hz gaming screen draws 144. A higher rate makes motion look smoother, which matters for games, scrolling and fast video.

This test measures how fast your browser draws frames. Browsers are built to draw one frame for each screen refresh, so counting frames over a few seconds tells you your refresh rate. A moving block on screen lets you see smoothness with your own eyes.

Features:

  • Refresh rate in Hz: a measured number, to one decimal place.
  • Closest standard rate: compares your result with 60, 75, 90, 120, 144, 165, 240 Hz and others.
  • Choppy frame count: finds frames that took much longer than usual.
  • Live reading: the Hz figure updates in the corner while the test runs.

How to Use the Refresh Rate Test

  1. Close busy tabs and plug in your laptop.
  2. Choose a test length, 5 seconds is recommended.
  3. Press Start test and keep this tab in front.
  4. Watch the yellow block and the live Hz reading.
  5. Read the estimated refresh rate and the smoothness result.

How the Rate Is Measured

  • Frames: the browser calls the test just before each repaint. Those calls generally match the display refresh rate, and the most common rates are 60, 75, 120 and 144 Hz.
  • Frame time: the gap in milliseconds between one frame and the next. The test uses the median gap, the middle value, so one slow frame does not spoil the result.
  • Refresh rate: 1,000 ÷ the typical frame time in milliseconds. A typical frame time of 16.67 ms gives 1,000 ÷ 16.67 = 60 Hz.
  • Long frames: frames that took more than 1.5 times the typical frame time. A smooth run has under 2% of them.
  • Warm-up: the first 10 frames are ignored, because the browser is still getting started.

Key Terms

  • Refresh rate: how many times per second a screen draws a new picture, in Hz.
  • Hertz (Hz): one cycle per second.
  • Frame time: the time between two frames, in milliseconds.
  • Stutter: uneven frames that make motion look jerky.

Worked Example

  • Your typical frame time is 6.94 ms.
  • Refresh rate: 1,000 ÷ 6.94 = 144 Hz, so the closest standard rate is 144 Hz.
  • In a 5 second test you would measure about 5 × 144 = 720 frames.
  • If 9 of 700 frames took over 10.4 ms (1.5 times 6.94), that is 9 ÷ 700 = 1.3%, so the run is smooth.

Real-Life Examples

  • Checking a new monitor: if you bought a 144 Hz screen and the test says 60 Hz, raise the rate in your display settings.
  • Gaming setup: check that your screen really runs at its top rate before you tune a game.
  • Laptop battery: run the test plugged in and on battery to see if the rate drops.
  • Troubleshooting stutter: a high count of long frames points to a busy computer rather than the screen.

Refresh Rate vs Frame Rate

  • Refresh rate: how often your screen can show a new picture, set by the screen. Measured in Hz.
  • Frame rate: how many pictures a game or video makes each second, in frames per second (FPS).
  • How they work together: a 144 Hz screen only looks smoother if the game makes about 144 FPS or more.

Common Refresh Rates

Refresh rateTime per frameTypical use
60 Hz16.67 msStandard screens and phones
75 Hz13.33 msSome office monitors
120 Hz8.33 msNewer phones, tablets and TVs
144 Hz6.94 msGaming monitors
240 Hz4.17 msFast gaming monitors

Why the Number May Be Lower Than Expected

  • Display setting: many screens run at 60 Hz until you raise the rate in your system's display settings.
  • Battery saver: laptops and phones often drop the rate to save power.
  • Background tab: browsers slow down tabs you cannot see, so keep the test in front.
  • Cable or port: some cables and ports cannot carry the highest rates, so check the one you use.
  • Busy computer: heavy apps can make frames late and give a lower or choppier result.

Common Mistakes to Avoid

  • Switching tabs during the test. Browsers slow background tabs, so the result will be low.
  • Testing on battery saver. The rate is often capped, so test plugged in.
  • Blaming the screen for a display setting. Many monitors need the higher rate switched on in system settings.
  • Reading one run as final. Run it twice and compare.
  • Expecting the number to match a game's FPS. Refresh rate and frame rate are different things.

Frequently Asked Questions

Press Start test, keep the tab in front, and read the estimated rate in Hz.

Yes, with no download and no sign-up.

It may be set to 60 Hz in your system display settings, or connected with a cable that cannot carry 144 Hz.

It is a measurement and can vary by about 1 Hz. Large differences point to power saving or a busy computer.

60 Hz is standard. 120 Hz or more feels smoother for games and scrolling.

Many laptops lower the rate on battery. Plug in and test again.

Yes. Many phones run at 60 or 120 Hz.

Frames that took more than 1.5 times the typical frame time, which look like small stutters.

It shows the rate your browser is drawing at during the test, which can differ if your screen changes its rate.

To save power, especially in background tabs and on battery.

It looks choppy for motion. It often means power saving is on.

Yes, if you open the page in the TV's browser.

It moves at a steady speed, so a stutter shows as a visible jump.

No. Nothing is stored or sent.

References & Sources

SourceUsed ForLink
MDN, Window.requestAnimationFrame() Callbacks run before each repaint, generally matching the display refresh rate; common rates are 60, 75, 120 and 144 Hz; paused in background tabs. https://developer.mozilla.org/en-US/docs/Web/API/Window/requestAnimationFrame

Cite or share this calculator

DigitalCalculators.net. (2026, November 19). Refresh Rate Test. https://digitalcalculators.net/refresh-rate-test/