Quick Answer
Clean your screen, then press Start full-screen test. The whole screen turns one solid color. Look slowly across it from a normal viewing distance, then click or press the right arrow for the next color. A dot that stays black on every color is a dead pixel. A dot that stays lit, such as a red dot on a black screen, is a stuck or hot pixel. Press Esc to exit.
Embed this calculator
Adjust the size if needed, then copy the code below into your page or blog. The calculator will load in an iframe and stay updated automatically.
Table of Contents
- Dead Pixel Test
- Quick Answer
- Related Calculators
- How This Dead Pixel Test Works
- How to Use the Dead Pixel Test
- How the Color Test Finds Faults
- Key Terms
- Worked Example
- Real-Life Examples
- Dead Pixel vs Stuck Pixel vs Hot Pixel
- Pixels by Resolution
- Dead vs Stuck Pixels and What You Can Do
- Common Mistakes to Avoid
- Frequently Asked Questions
- References & Sources
How This Dead Pixel Test Works
Every screen is made of millions of tiny pixels, and each pixel has three sub-pixels: red, green and blue. When a pixel or sub-pixel fails, it shows as a small dot that does not match the rest of the screen. The easiest way to find it is to fill the whole screen with one solid color at a time.
This test is worth doing on a new monitor, laptop, TV or phone while you can still return it, and on a used screen before you buy it.
Features:
- Full screen: each color fills the whole display, with the cursor hidden.
- Nine colors: black, white, red, green, blue, cyan, magenta, yellow and gray, or a quick five-color test.
- You control the pace: click or press an arrow key to change color. Nothing flashes.
- What to look for: the results tell you which fault each color reveals.
How to Use the Dead Pixel Test
- Clean the screen with a soft, dry cloth.
- Press Start full-screen test.
- Look slowly across the whole screen for odd dots.
- Click or press the right arrow for the next color.
- Press Esc when you are done, and note where any faults are.
How the Color Test Finds Faults
- White (all sub-pixels on): a dead pixel stays black.
- Black (all off): a stuck or hot pixel stays lit, often red, green, blue or white.
- Red, green and blue (one sub-pixel type on): a dot of another color means a sub-pixel is stuck on or off.
- Cyan, magenta and yellow (two types on): help confirm which sub-pixel is faulty. For example, a red dot on cyan means the red sub-pixel is stuck on.
- Gray: shows backlight bleed, clouding and banding, which are panel issues rather than single pixels.
Key Terms
- Pixel: the smallest dot on a screen, made of red, green and blue sub-pixels.
- Dead pixel: a pixel that never lights up.
- Stuck pixel: a pixel or sub-pixel stuck on one color.
- Backlight bleed: light leaking at the edges of an LCD screen, seen on dark or gray images.
Worked Example
You test a new 27-inch monitor with a resolution of 2560 x 1440.
- The screen has 2560 × 1440 = 3,686,400 pixels, or about 11 million sub-pixels.
- On black you spot one bright green dot near the top left. On green it disappears, and on magenta it shows as a green dot.
- That is a stuck green sub-pixel: it is always on.
- On white there are no black dots, so there are no fully dead pixels.
- Check the maker's pixel policy: some replace a screen for one bright dot, others only after several.
Real-Life Examples
- New monitor: a 1920 x 1080 screen has 2,073,600 pixels; check them all within the return period.
- Used laptop: test before paying; a stuck pixel in the middle is much more annoying than one at the edge.
- TV: open the page in the TV browser or cast it, and check a 4K panel with 8,294,400 pixels.
- Phone: check a replaced screen after a repair.
Dead Pixel vs Stuck Pixel vs Hot Pixel
- Dead pixel: black on every color; no light at all.
- Stuck pixel: always one color (red, green or blue); can sometimes recover.
- Hot pixel: always white or very bright; easiest to see on black.
Pixels by Resolution
| Resolution | Name | Pixels |
|---|---|---|
| 1366 x 768 | HD | 1,049,088 |
| 1920 x 1080 | Full HD | 2,073,600 |
| 2560 x 1440 | QHD | 3,686,400 |
| 3840 x 2160 | 4K UHD | 8,294,400 |
Dead vs Stuck Pixels and What You Can Do
- Dead pixel: always black. The pixel gets no power, and it usually cannot be fixed.
- Stuck pixel: stuck on one color. These sometimes recover on their own after hours or days of normal use.
- Gentle pressure: some people press lightly on the spot through a soft cloth with the screen off; this can damage the panel, so do it at your own risk.
- Warranty: manufacturers set their own rules for how many faulty pixels qualify for a replacement. Test as soon as you get the screen.
- Dust or a scratch: it moves when you clean, or looks the same on every color, including black.
Common Mistakes to Avoid
- Not cleaning the screen. Dust looks like a dark pixel on white.
- Testing in a small window. Use full screen so every pixel is covered.
- Looking too quickly. Scan slowly, section by section.
- Skipping black. Stuck and hot pixels show best on black.
- Waiting too long. Test new screens straight away, inside the return period.
Frequently Asked Questions
Press Start full-screen test and look at each solid color for dots that do not match.
A tiny black dot that stays black on every color, easiest to see on white.
A dot of one color, often red, green or blue, easiest to see on black.
Sometimes. Stuck pixels can recover with normal use; dead pixels usually do not.
No. The color only changes when you click or press a key.
Press Esc.
Yes, in any modern browser. Tap to change color.
It happens. Whether it is covered by warranty depends on the maker's pixel policy.
Gray shows uneven brightness, backlight bleed and banding.
A hot pixel is always white or very bright; a stuck pixel is stuck on one color.
No. Showing solid colors is just like showing any other image.
Yes. Also check for burn-in, which shows as a faint ghost image on gray.
About a minute for nine colors, or longer for a big screen.
Yes. Press the left arrow in full screen.
References & Sources
| Source | Used For | Link |
|---|---|---|
| Wikipedia, Defective pixel | Dead, stuck and hot pixels and how they appear. | https://en.wikipedia.org/wiki/Defective_pixel |
| MDN Web Docs, Fullscreen API | How the page shows each color across the whole screen. | https://developer.mozilla.org/en-US/docs/Web/API/Fullscreen_API |